02/05/2004

couple of ways to show the evoked potential modulation broadcasts

This e-mail/post will contain a method of demonstrating the evoked

potential modulation and computer manipulation of the evoked

potentials without actually attacking someone. I will start with a

list of equipment that will be needed.

3 computers with visual displays (monitors) or speakers depending on

stimulus used. These computers only need to be able to run basic

evoked potential correlation software and display EEG readings. 1 of

them needs to be able to work in conjunction with broadcasting

equipment to transmit the broadcasts, the other two will need to be

able to work with receiving equipment to pick-up the transmissions.

1 EEG machine with computer compatibility. NOTE, an MRI machine may be

substituted for the EEG machine, however they do require the

irradiation of the person being monitored.

1 broadcasting apparatus that works in conjunction with a computer to

modulate the evoked potential data onto the electromagnetic radiation

transmissions. For purposes of this demonstration, the range of the

transmissions need only be about 20 to 50 feet.

2 receiving apparatuses that work in conjunction with a computer to

decipher the above mentioned transmissions.

1 or more individuals to participate in the demonstration. This would

probably work better if the participants were not already being

attacked by the psychotronic weaponry.

Correlation software for at least two of the computers or as mentioned

later possibly for all three. This software either needs to include a

pre-programmed stimulus package or be adaptable to work with one.

After setting up the equipment mentioned, place the electrodes from

the EEG machine up to one of the participants. Using the computer that

will be at the transmission end, begin the pre-programmed stimulus

package and the correlation process. The stimulus package may need to

be repeated for the correlation process. For this demonstration, only

one type of stimulus (auditory, visual, tactile, etc) needs to be

used. The stimulus does however need to correspond to the area of the

brain being monitored by the EEG machine. Once the correlation process

is completed, unhook the participant from the EEG machine. During the

correlation process, a secondary display can be set up to show what is

being correlated and/or how the process works. The data recorded

should be saved to a disc and then loaded into the computer with the

correlation program or one of the computers if both have the software.

At this point, the computer used for correlation in conjunction with

the transmission equipment would begin modulating the electromagnetic

transmission with the evoked potential patterns and begin broadcasting

to the other computers and their receiving equipment. The receiving

computer that has the specific evoked potential data loaded from the

previously mentioned disc would then be able to display the received

signals and what they correspond to in the pre-programmed stimulus

package. The other receiving computer with or without the correlation

software will not be able to display the corresponding stimulus from

the pre-programmed package to the electromagnetic transmissions that

were modulated with the evoked potential patterns without the data

from the previously mentioned disc being loaded into it. The person

running the demonstration could then also change the order that the

electromagnetic transmissions are modulated in the specific evoked

potential patterns from what corresponded to the stimulus package.

This in turn would show up on the receiving computer that was loaded

with the data from the disc. Said demonstrator could then also

manipulate the evoked potential data in the first computer to change

the appearance from the stimulus package. Along the lines of using the

data obtained to transmit a different set of evoked potentials, which

for example purposes would make a black square from the stimulus

package into a green square and a green circle from the stimulus

package into a black circle. Which in turn, would be displayed on the

receiving computer with the data from the disc loaded into it. The

psychotronic weaponry is capable of doing a lot more than this

unfortunately. The third computer mentioned can be made to display the

signals that it receives, much like an EEG display, or could be used

just to show that the signals would be 'noise' to it. By using the

third computer with the correlation software, one could then load the

specific evoked potential data from two separate individuals into the

separate receiving computers. The first computer could then be used to

transmit the different patterns in pulses which would only be

deciphered by the computer with the corresponding data from the discs.

For this demonstration, I would suggest using frequencies that would

not affect the participants unless giving them full warning and having

their consent. All data obtained should be promptly destroyed after

the demonstration.

The rest of this e-mail/post will contain some other methods to

possibly try.

Using an EEG machine hooked up to broadcasting equipment and one

hooked up to receiving equipment. Just to show that the

electromagnetic transmissions can be modulated with evoked potential

patterns. This method could also be used with varying transmission

strength to see if able to pick-up without the receiving equipment or

just by the electrode sensors.

Using an EEG machine with broadcasting equipment to see if the

modulations could be picked up on a MRI machine. Broadcasting the

modulated electromagnetic waves into the MRI to see if it picks them

up. Again using various power levels for the transmissions.

Death to psychotronic weaponry. Religion is fraud. James M. Vierling

Jr.